How to use nalli silk to make a silky teddy bear

Posted October 05, 2018 15:15:50 This is what I had planned to make, so I decided to use it for something I really liked, a silken teddy.

I had a feeling that I would be making a little teddy bears that would be really cute.

What you need: Nalli silk.

I used the cotton from the garden center, but if you don’t have that, you can use any fine silk fabric you have lying around.

1.

Start by making your own cotton fabric.

This is your fabric.

2.

The basic idea is to make your silken fabric a little bit longer than the length of your teddy or other teddy you are planning to make.

3.

Then, you cut your silk into strips.

4.

This will give you strips that will fit over the sides of your silk.

5.

For this pattern, I made a lot of strips and used a ruler to measure them.

6.

Take your strips and lay them out on your sewing machine.

7.

Using your ruler, measure out how much silk you want each strip to be, and then cut it out.

8.

This piece will make 3 or 4 strips.

You can cut them out in any size you want.

9.

The next step is to sew your silks together.

10.

You’ll need a few pieces of silks, a thread, a pair of scissors, and a needle.

11.

Then you will need to cut out the threads.

12.

You should be able to use your needle to cut the threads into strips that are exactly the same length as the strips you just made.

13.

Repeat with the remaining strips.

(Or, you could just use a ruler and measure out the length, and use the thread to make the strips).

14.

Finally, sew the silks back together using your needle.  

Posted October 05, 2018 15:15:50 This is what I had planned to make, so I decided to use it for…